Products

Our Fitness Products

Range Of Outdoor Fitness Equipment

Royal Sports India was established in 2007 in Meerut. Initially, we started with manufacturing and import of domestic and commercial fitness equipment’s and today we are pioneer leading manufacturing company of quality indoor & outdoor fitness equipment and we specialize in the product like body shaper, cross walker, leg press, air walker, chest press, air swing, waist twister, parallel bars, pull & push chair & the list goes on. We serve almost all major cities of India with our quality products and unmatched service. Also, providing the installation setup to our customer’s locations.

BODY SHAPER

BODY SHAPER

CROSS WALKER

CROSS WALKER

LEG PRESS

LEG PRESS

AIR WALKER

AIR WALKER

SEATED PUSH CHEST PRESS

SEATED PUSH CHEST PRESS

AIR SWING

AIR SWING

WAIST TWISTER TRIPLE

WAIST TWISTER TRIPLE

PARALLAL BARS

PARALLAL BARS

PULL AND PUSH CHAIR

PULL AND PUSH CHAIR

Functions: Developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. Good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.
Approaches: Sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. Revert slowly.
Size: 2187×902×1707 mm
Material: Pre Galvanized Mild Steel ,
Material Thickness: 3 mm.
Paint: All Weather Double Layer Powder Coated Paint Sealed Ball Bearing, Steel Seats for long lasting life

DIPS AND LEG RAISER

DIPS AND LEG RAISER

Functions: Develops the strength of upper limbs, shoulder and chest, strengthening cardiac and pneumonic functions.
Approaches: Hold the crossbars tight with your hands and lift yourself up, then using the strength of your arms to do the pull-up action. Repeat according to your physical conditions.
Users: Suitable for middle-aged people and youths.
Size: 1802x612x1399 mm
Material: Pre Galvanized Mild Steel,
Material Thickness: 3 mm.
Paint: All Weather Double Layer Powder Coated Paint

ELLIPTICAL EXERCISER

ELLIPTICAL EXERCISER

Functions: Develops the whole body joints, strengthening cardiac and pneumonic function, and shaping figure.

Approaches: Putt your feet on the pedals, holding the handles with your both hands and moving your hands and feet alternately.
Users: Suitable for people of different ages except children.
Size: 1140×706×1680mm
Material: Pre Galvanized Mild Steel, Material
Thickness: 3 mm.
Paint: All Weather Double Layer Powder Coated Paint Sealed Ball Bearing

SINGLE POLE ROWING MACHINE

SINGLE POLE ROWING MACHINE

Functions: The rowing action is known to be one of the best forms of exercise, working arms, shoulders, chest, back and abdomen. The Rower offers cardiovascular and toning benefit for all ages. Approaches: Put your feet on the pedals, hold the handles with both hands, pull the handles towards your body. Repeat simulated rowing action.
Size: 1400×1007×834mm
Material: Pre Galvanized Mild Steel, Material
Thickness: 3 mm.
Paint: All Weather Double Layer Powder Coated Paint , Sealed Ball Bearing , Steel Footrest / Foot paddle for long lasting life

AIR WHEEL

AIR WHEEL

Functions : Increasing mobility of shoulderelbow, hip-knee joint and strengthening cardiac and pneumonic function.
Approaches: Legs in sitting stance, hold to the handgrips of rotating wheels with both hands and press, turn the wheels in the same or opposite direction for 3-5 minutes.
Size: 1258×1029×1353
Material: Pre Galvanized Mild Steel, Material
Thickness: 3 mm.
Paint: All Weather Double Layer Powder
Coated Paint. Sealed Ball Bearing, Steel Seats for long lasting life

AB TRAINER/SIT-UP BENCH

AB TRAINER/SIT-UP BENCH

Functions: Developing the strength and flexibility of lumbar and abdominal muscles consuming the fat in waist and abdomen, good for figure shaping and bodybuilding.
Approaches: Hang up the round pipe with feet, crossing the hands behind head, making body backward to the trainer, recovers.
Size: 1504×1133×624 mm
Material: Pre Galvanized Mild Steel,
Material Thickness: 3 mm.
Paint: All Weather Double Layer Powder Coated Paint

SINGLE POLE SETUP CYCLE

SINGLE POLE SETUP CYCLE

Functions: Strengthening cardiac and pneumonic function remarkably by means of the coordinated movement of whole body, relieving fatigue of body.
Approaches: Sit on the base plate, hold the handles with both hands and put your feet on the pedals, do the movement as riding.
Size: 933×550×1330mm
Material: Pre Galvanized Mild Steel,
Material Thickness: 3 mm. Stainless Steel Nuts, High Quality Durable Steel Seats.
Paint: All Weather Double Layer Powder Coated Paint

LEG PRESS/ STRETCH

LEG PRESS/ STRETCH

Functions: Developing the strength of lower limbs and improving the stability and agility of three main joints of lower limbs. Good for healing inconvenience of bending and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc.
Size: 894×853×1203mm.
Material: Pre Galvanized Mild Steel,
Material Thickness: 3 mm. Stainless Steel Nuts, High Quality Durable Steel Seats.
Paint: All Weather Double Layer Powder Coated Paint

SHOULDER WHEEL

SHOULDER WHEEL

Functions: Building up the muscles of upper limbs, enhancing the flexibility and agility of shoulder joint.
Approaches: Hold the handgrips of rotating wheel with both hands and body should roll simultaneously clockwise or counter-clockwise following the wheel.
Size: 863×874×1882
Material: Pre Galvanized Mild Steel, Material
Thickness: 3 mm.
Paint: All Weather Double Layer Powder Coated Paint. Sealed Ball Bearing, Steel Seats for long lasting life

SINGLE POLE SETUP CYCLE

SINGLE POLE SETUP CYCLE

Functions: Strengthening cardiac and pneumonic function remarkably by means of the coordinated movement of whole body, relieving fatigue of body.
Approaches: Sit on the base plate, hold the handles with both hands and put your feet on the pedals, do the movement as riding.
Size: 933×550×1330mm
Material: Pre Galvanized Mild Steel,
Material Thickness: 3 mm. Stainless Steel Nuts, High Quality Durable Steel Seats.
Paint: All Weather Double Layer Powder Coated Paint

STANDING TWISTER

STANDING TWISTER

Functions: Developing the strength of waist and hip, improving the flexibility and agility of waist and shaping figure.
Size: 1596×382×1303mm
Material: Pre Galvanized Mild Steel, Material
Thickness: 3 mm.
Paint: All Weather Double Layer Powder Coated Paint. Sealed Ball Bearing, Steel Seats for long lasting life

KNEE-HIP RAISE

KNEE-HIP RAISE

Functions: Develops the strength of upper limbs, shoulder and chest, strengthening cardiac and pneumonic functions.
Approaches: Hold the crossbars tight with your hands and lift yourself up, then using the strength of your arms to do the pull-up action. Repeat according to your physical conditions.
Users: Suitable for middle-aged people and youths.
Size: 1802x6l2x1487mm
Material: Pre Galvanized Mild Steel, Material
Thickness: 3 mm.
Paint: All Weather Double Layer Powder Coated Paint

SIT-UP BENCH

SIT-UP BENCH

Functions: Developing the strength and flexibility of lumbar and abdominal muscles consuming the fat in waist and abdomen, good for figure shaping and body building.
Approaches: Hang up the round pipe with feet, crossing the hands behind head, making body backward to the trainer, recovers.
Size: 1440×1468×518 mm
Material: Pre Galvanized Mild Steel, Material
Thickness: 3 mm.
Paint: All Weather Double Layer Powder Coated Paint

BACK EXTENSION

BACK EXTENSION

Functions: The Back Extension equipment strengthens the lower erector spinae muscles of the lower back, as well as the gluteus and hamstring areas. This will also have the effect of improving posture and stability. To perform the exercise, lie forward on the back extension bench with your thighs resting against the green pad and the heels held in the foot bracket. With your hands behind
your head, or arms across the chest, slowly raise your upper body to a high comfortable position, extending the lower back until the lumbar curve is increased. Hold briefly, then slowly lower to the starting position. Perform this carefully to protect the lower back
Dimensions: 1280*701*914
Material: Pre Galvanized Mild Steel, Thickness: 3 mm.
Paint: All Weather Double Layer Powder Coated Paint

HIGH PULL CHAIR

HIGH PULL CHAIR

Specification: 931 x742x 1652mm
Material: Steel
Use area: 0.7 Square Meter
Functions: Developing the strength of upper limbs and the muscle groups of shoulder region and back. Improving the flexibility, agility and coordination of shoulder joints and elbows. Good for healing aches in Joints end the bending end stretching hindrances of joints.
Approaches: Sit on the chair and step on the footboard. Stretching legs with force and recover slowly. Repeat.
Users: Suitable for people of different ages.
Notice: Standing on the seat is forbidden. Make 1 to 3 sets of movements, repeat each set 5 to 10 limes according to your physical conditions. Unsound person doing this should be authorized by their doctors

HORIZONTAL LADDER

HORIZONTAL LADDER

Functions: Try swinging down the length of the bars, reaching and grasping, overhand, one bar after the other. Stronger and/or lighter individuals will be able to use more of a bent arm. You can also simply use the equipment for chinups, using a variety of grips. Also, try lifting the knees and legs while hanging, helping to build abdominal strength.
Dimensions: 3000*1100*2400MM
Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Main Tube 114mm & 3mm
Paint: All Weather Double Layer Powder Coated Paint

Product Purchase Policy

Outdoor Fitness Equipment Purchase Criteria

  1.  GST RATE OF IS CHARGED SEPARATELY ON TOTAL AMOUNT.
  2.  TRANSPORTATION CHARGES ARE SEPARATE FROM TOTAL AMOUNT.
  3.  20% PAYMENT IS MADE IN ADVANCE REST BEFORE DISPATCH.
  4.  MATERIAL IN MANUFACTURING IS USED AS PER THE CATALOG.
  5.  DIMENSIONS AND OTHER SPECIFICATION WILL BE AS PER THE REQUIREMENT.
  6.  THERE IS A STANDARD WARRANTY ON EQUIPMENT WELDING FOR FIVE YEARS.
  7.  TIME TAKEN IN MANUFACTURING THE EQUIPMENT DEPENDS ON THE NUMBER OF
    PIECES OF EQUIPMENT.
  8.  INSTALLATION & PACKING CHARGES WILL BE EXTRA INSTALLATION OF THE MACHINES WILL BE DONE BY THE COMPANY AT THE CUSTOMER’S PLACE.